Home Archives for January 2012
This is the circuit diagram of cricket chirping sound generator based on IC 4060, a 14 stage ripple counter and oscillator IC. A suitable audio wave form is produced by IC2 and related electronic components, driving the mini speaker through Q1. To allow a more real-life behavior, the chirp is interrupted in a pseudo-casual way by two timers built around IC1C and IC1D, whose outputs are mixed into IC1B and further time-delayed by IC1A, driving the reset pin of IC2.
This is the 19W power amplifier circuit built based power IC LA4440. The LA4440 output configured in bridge connection. The LA4440 can be used for stereo amplifier and it will give power output of 6W on each channel. But if you use this power IC in bridge mode, the it will deliver power audio output up to 19W. Recommended supply voltage is 13.2V, 2A and heatsink should be mounted on the power IC.
This is the easy build surround sound processor circuit using the digital delay process method. This audio processor isn't applying any unique function ICs that tough to obtain parsonaly, and designed in only common purpose ICs.
The kind of this Surround Processor is producing the surround impact with processing two channels of stereo supply. The majority of those are generates the surround impact with separates reverberations from supply signal and applies any processes, after which mix it to front channels or output as rear channel.