Home misc Basic Monostable Multivibrator based IC 555

Basic Monostable Multivibrator based IC 555

Tags

The following diagram is the circuit diagram of the very basic monostable multivibrator which built based on timer IC 555.

Basic Monostable Multivibrator based IC 555 circuit



Parts list:
R1 = see notes
C1 = see notes
C2 = 10nF
IC1 = LM555

Notes:
  • R1 and C1 determine length of output pulse where t=R1xC1 and R1 is in ohms and C1 is in farads.
  • Pin 4 is the RESET. Leave it connected to power supply (+V) during normal operation. Bring pin 4 AND pin 2 low at the same time to reset timing cycle.
Make Your Own Printed Circuit Boards
Make a PCB in very easy steps..! Create your PCB design using PCB designer software like Eagle, print out your design on photo paper or glossy paper with laserjet printer. Stick the printed design on the PCB (copper side) and then heat it using hot iron plate. The ink will stick on the PCB and it will be ready for etching process.
Watch this video detailed steps:


Note: If you don't have laserjet printer, then you can print the design on standard paper. Copy the printed design at Copy Service around your location (with glossy paper).

Artikel Terkait

schematic diagram

Next Post
Previous Post
Subscribe to: Post Comments (Atom)